Biomedical Equipment Technician (BMET) CDC Set A Volume 5 Practice Exam

These questions are part of the practice quiz. Start practicing

• Which organization also oversees medical devices, in addition to the FDA?
• What three-phase, four-wire system does the Air Force permit for use in medical facilities?
• What common issue might BMETs troubleshoot in medical devices?
• What is a vital characteristic of a top-quality medical device?
• What component is primarily responsible for power and light distribution within a tent at an EMEDS site?
• What role does the facility manager play in a medical facility?
• What is a key consideration when using medical devices in clinical settings?
• Why is environmental safety important for BMETs?
• How can BMETs enhance the service quality in health facilities?
• The amount of current a conductor can safely carry depends on the metal used, wire size, type of insulation, and?
• Which generator component allows operation through fault conditions for a critical event?
• Who is responsible for appointing the military treatment facility (MTF) safety officer?
• What is a common outcome of effective collaboration between BMETs and clinical staff?
• What is one benefit of having repair stations in biomedical workshops?
• Which type of plan outlines the overall layout and design of a healthcare facility?
• What does electromagnetic interference (EMI) refer to in medical devices?
• What type of circuit breaker is best suited for general use?
• Which blower connects to the bump-through door airlock and provides nuclear, biological, and chemical (NBC) filtration and positive pressure capabilities?
• Who is responsible for the daily operations and overall facility upkeep in a medical facility?
• What is a typical workflow for a BMET when handling a malfunctioned device?
• What component allows one generator to jump-start another with a depleted battery?
• What is the primary purpose of using a flywheel in a rotary uninterruptable power supply?
• What is the key objective of device calibration?
• Who is responsible for maintaining the generators when in use?
• Oxygen (O2) pressure relief valves open if the pressure in a pipeline system exceeds the normal level by more than?
• Medical air must contain between what percentage of oxygen?
• What does the acronym "CAP" stand for in a medical device context?
• Which organization is responsible for setting standards for the electrical safety of medical devices?
• Which type of transformer provides a steady secondary voltage from no load to full load?
• What is the main function of an electrocardiogram (ECG) machine?
• What safety measure is critical when using a generator on an EMEDS site?
• In the context of biomedical equipment, what does PM stand for?
• How often should electrical cable assemblies on a UTS System be checked for kinks or cracks?
• What information can you find on a schematic?
• What type of wiring system includes wire sizes No. 40 to No. 4/0?
• What is the role of an alarm system in a medical device?
• Why is cross-training among BMETs important?
• Which of the following is crucial for troubleshooting medical equipment?
• What is the primary function of calibration devices in a biomedical workshop?
• What energy source does a defibrillator utilize to function?
• What is the key factor that determines the size of the power distribution center (PDC) at an expeditionary medical support (EMEDS) site?
• At what rate can the oxygen generator and liquefier (OGL) system produce liquid oxygen (LOX)?
• What three branches make up the essential electrical system?
• What type of equipment would typically be found in a biomedical workshop?
• What is the primary focus of risk management in a clinical setting?
• What must be checked to ensure the proper operation of emergency equipment?
• What role do testing apparatus play in a biomedical workshop?
• Which wiring system would you use in small structures where the main need is for lighting?
• What is a common application for elevation drawings in building construction?
• What is the main purpose of back-up oxygen cylinders in a medical oxygen system?
• What is the typical approach for BMETs ensuring effective device management?
• What does medical equipment lifecycle management involve?
• What is not a major component of a central gas system?
• What instrument do you use to measure true power?
• Identify the key document that outlines manufacturer specifications for a medical device.
• What type of pipe is rated 180°F at 100 psi and is typically used in hot water distribution systems?
• If a made electrode fails the ground resistance test, how far must an additional ground electrode be placed from the existing electrodes?
• How often should preventive maintenance be performed on medical equipment?
• What distinguishes Type A medical devices from Type B devices?
• What characterizes a biocompatible device?
• Describe one method to maintain sterilization of medical devices.
• What is a medical device service record?
• Which tool is commonly used by BMETs to repair malfunctioning medical devices?
• Which type of room typically requires a negative pressure environment?
• How are circuit breakers typically rated?
• What component is critical in maintaining the power distribution system's reliability?
• Which method allows for the easy disconnection of all main power from the power distribution center (PDC) at an EMEDS site?
• How do Biomedical Equipment Technicians (BMETs) assess training program effectiveness?
• Which is a common standard for medical device safety testing?
• What is the steam pressure typically used for heating the military treatment facility (MTF)?
• In a three-phase transformer, how many degrees is each phase displaced?
• Which of the following is a common preventive maintenance task performed by BMETs?
• How are large transformers cooled?
• For which purpose is a preventive maintenance schedule created?
• Which safety measure is typically recommended when handling gas cylinders?
• Which Air Force centralized contract governs housekeeping services?
• What is the main goal of training hospital staff on medical equipment?
• Why is it essential for BMETs to stay informed about advancements in medical technology?
• How does a cooling tower primarily dissipate heat?
• What type of circuit provides power to the final overcurrent devices?
• What is a significant benefit of using a computerized maintenance management system (CMMS)?
• Which area of expertise would NOT typically be associated with a BMET's responsibilities?
• What is the primary function of an infusion pump?
• What is the primary purpose of conducting safety tests on medical devices?
• What is the primary purpose of a Biomedical Equipment Technician (BMET)?
• How often should you exercise an emergency generator under full load?
• Which type of transformer eliminates spark hazards where flammable anesthetics are used?
• Which is not a typical scale used in blueprint production?
• What governs the provision of housekeeping services in Air Force medical facilities?
• Which functional area is critical for maintaining patient safety and security in a medical facility?
• What is the primary purpose of a service level agreement (SLA) in healthcare technology?
• Which is not part of the chiller's refrigeration loop?
• Why is it crucial for medical equipment to undergo a risk assessment?
• In what situations should BMETs escalate an equipment issue to the manufacturer?
• In biomedical engineering, what does the term "field service" refer to?
• The expanded one-sided ISO shelter provides how many square feet of usable floor space?
• Which document serves as a template for other plans?
• In the context of a medical facility, what does the acronym MTF stand for?
• What is the first step in a preventive maintenance check?
• Why are training sessions important for BMETs?
• Which type of protective device is commonly found in bathrooms and wet locations within a medical facility?
• What kind of testing is required for back-up oxygen cylinders in a Deployable Oxygen Generation System?
• How do BMETs contribute to patient safety?
• Which voltage levels are defined as "low voltage" in medical devices?
• What are the liters of air per minute vacuum requirement for the surgery department?
• How does the AAMI contribute to the field of biomedical engineering?
• How many liters per minute of 93% pharmacological oxygen (O2) can the Expeditionary Deployable Oxygen Concentration System (EDOCS) 120 generate?
• In what manner do Type B medical devices typically differ from Type A?
• The Air Force prefers which three-phase distribution system?
• Why is it critical for BMETs to understand the principles of fluid dynamics?
• How is "biomedical instrumentation" defined?
• What is the minimum space required to set up an expeditionary medical support (EMEDS) health response team (HRT) configuration?
• What minimum full-demand fuel supply are you required to have onsite for an emergency generator?
• What is a key factor when selecting medical equipment for a healthcare facility?
• What is used to count ground-referenced electrons in an isolated power system?
• What is the primary purpose of a branch box at an EMEDS site?
• What action is crucial to prevent infection transmission via medical devices?
• What is a critical aspect of teamwork for BMETs in a clinical setting?
• What component in an environmental control unit (ECU) is responsible for taking low-pressure, low-temperature refrigerant and delivering high-pressure refrigerant to the condenser?
• How are transformers classified?
• What is a primary goal when BMETs troubleshoot devices?
• Which statement describes improper care of blueprints?
• Which document is used to depict the exterior or interior walls of a building?
• What are the dimensions of a UTS System TM60 Tall shelter?
• What is the importance of keeping up-to-date documentation on service provided to medical equipment?
• Which method is critical for ensuring electrical safety in medical devices?
• What is one challenge BMETs may face when working with older medical devices?
• Why should BMETs stay informed about manufacturing recalls?
• How many hours of back-up oxygen (O2) can the Hospital Oxygen Backup System (HOBS) provide?
• What is one of the main responsibilities of a Biomedical Equipment Technician?
• In a gas supply system, what role do connectors play?
• Which of the following is not a component of an air handling unit (AHU)?
• What is the significance of maintenance in medical equipment lifecycle management?
• What is the main purpose of pressure regulators in medical gas systems?
• What is a primary focus of an SLA between service providers and healthcare facilities?
• What is a typical consequence of inadequate device maintenance?
• What is the factor that primarily determines the choice of wire size in medical facilities?
• How much usable floor space does the expanded two-sided ISO shelter provide?
• What is the primary function of the compressor in an environmental control unit (ECU)?
• What does quality assurance in healthcare technology involve?
• What scale deals with increments of 12?
• What function does an alarm system serve in medical devices?
• What is the designed lifespan of an Alaska Medical Shelter System (AKMSS) when fully erected or stored?
• What process does the Deployable Oxygen Generation System -medium (DOGS-M) use to separate oxygen (O2) and argon from the inlet filter?
• What type of tools do BMETs use for regular maintenance of medical devices?
• Which of the following best describes the power distribution feeder in an EMEDS context?
• Which wiring system uses two ungrounded conductors and one neutral conductor to provide power and light?
• In an environmental control unit (ECU), which component is primarily tasked with cooling air?
• When installing an environmental control unit (ECU), what is the minimum unobstructed room required for condenser air circulation?
• What is one expected outcome of effective device calibration?
• How can BMETs facilitate the selection of new medical equipment?
• How do BMETs utilize feedback from clinical staff?
• What type of drawing provides a cross-sectional view through a structure?
• What is one of the primary roles of a Biomedical Equipment Technician in infection control?
• What documentation is essential for operating and maintaining equipment at EMEDS?
• What is a critical part of the medical device lifecycle managed by BMETs?
• What role does software verification play in the management of medical devices?
• What color is an insulated grounding conductor wire?
• Which component in an ECU is responsible for ensuring proper cooling during operation?
• Besides delta, what are the other two types of three-phase transformers used by the Air Force?
• Why might a BMET engage in ongoing training programs?
• Which of the following is not an oxygen (O2) system that can be transfilled by the oxygen generator and liquefier (OGL) system?
• What system is designed to ensure a toxic-free zone through NBC filtration and positive pressure capabilities?
• Which of the following is not a category of static uninterruptable power supply?
• What types of fuses would you use in medical facilities?
• In a medical treatment facility (MTF), a regulator is used to reduce the oxygen (O2) pressure to what safe operating range?
• What are the two types of floor plans?
• What is the pressure level of a full H-size cylinder of oxygen (O2)?
• What is the primary purpose of an emergency generator?
• Boilers normally operate at what steam pressure?
• Between which points would you measure to obtain line voltage in a wye system transformer?
• What subjects are BMETs responsible to brief the environment of care committee (EOCC) on?
• What is an important assessment tool used by BMETs for training success?
• What is the approximate weight of the lightweight environmental control unit (LECU)?
• How often do the back-up oxygen (O2) cylinders in the Deployable Oxygen Generation System - medium (DOGS-M) require hydrostatic testing?
• What component of an MRI machine is critical for patient safety?
• What is the significance of the FDA in medical device regulation?
• In a three-phase system, how many wires are generally used?
• Which example qualifies as a primary normal ground electrode?
• What is the role of an electrical safety analyzer?
• Which type of pipe is least commonly used for hot and cold water applications?
• In which application would you typically use a stand-alone uninterruptable power supply?
• Which is not one of the functional areas of environment of care (EOC) management plans?
• What type of grounding involves connecting all exposed, noncurrent-carrying metal parts of an electrical system to the Earth?
• How many square feet does a standard military tent provide on average for medical purposes?